 |
  
 
. 
.................
..................................................................................................................
1. Internal Broach Machine
...1) BV - T series
 |
ex) BV-T5-8
B V : Vertical Broaching
T 5 : Pulling Force 5(ton)
8 : Cutting Stroke 800(mm)
|
...2) KBV - T series
ex) KBV-T5-4
B V : Vertical Broaching
T 5 : Pulling Force 5(ton)
4 : Cutting Station 4(ea)
...3) NUV - Series
2. Surface Broach Machine
... 1) NSV - Series
■ BROACH M/C ASSEMBLING LINE
..................................................................................................................
.......SPECIAL
MACHINE
......
......... Standard
Accessories
......... ㆍ CNC Control
Unit Standard Electrical Enclosure
......... ㆍOD.
ID Tool Holder
......... ㆍSplash
Guard
......... ㆍHyd.
Pump Unit
......... ㆍCoolant
System
......... ㆍ4-jaw
Independent Chuck
......... ㆍ2
sets of Centers
......... ㆍCenter
Sleeve
......... ㆍWork
Light
......... ㆍAdjusting
Tools and Tool Box
......... Optional
Accessories
......... ㆍH6 Auto-index
Turret
......... ㆍHyd.
Power Chuck
......... ㆍFace
Plate
......... ㆍChip
Conveyor
......... ㆍ4-jaw
Independent Chuck
......... ㆍSteady
Rest
......... ㆍHyd.
Tailstock
......... ㆍExtra
Tool Holder
......... ㆍ3-jaw
Scrool Chuck
......... ㆍFollow
Rest
......... ㆍLive
Center
......... ㆍH4
Auto-index Turret
......... Special
Arrangements
......... ㆍSwing over bed
1300mm
......... ㆍSwing
over bed 1500mm
......... ㆍLonger
center distances on reguest.
......... Special
Attachments
......... ㆍ Milling Unit
for Special Threading
......... ㆍSpline
Unit for Spline,Key Way, Bevel Gear Cutting
......... ㆍHigh
Speed Threading Unit for High Speed one Passing Threading
......... ㆍHeavy
Duty Cnc Lathe
Model |
- |
CN
75 | CN 85 |
Type |
- |
75*100,75*150,75*200,750*250,75*300 |
Type |
- |
85*100,85*150,85*200,85*250,85*300 |
Capacity
swing over Bed |
mm |
750(Special
: 850) |
swing
over Carriage |
mm |
450(Special
: 550) |
Centers
Distance |
mm |
1000,15000,2000,2500,3000 |
Spindle
Nose |
- |
A1-11 |
Taper
Hole |
mm |
ø90.7
5.2/Taper |
Bore |
mm |
ø84(Special
ø105) |
Center |
- |
M.T.No.6 |
Speed
Change |
- |
Auto
4 Range Stepless |
Speed
Range |
rpm |
9~950(Special
15~1500) |
Carriage
Z-axis Travel |
mm |
1000,1500,
2000,2500,3000 |
Z-axis
Rapid Feed |
mm/min |
10000 |
X-axis
Travel |
mm |
430 |
X-axis
Rapid Feed |
mm/min |
6000 |
Tailstock
Quill Diameter |
mm |
120 |
Quill
Hole Taper |
- |
M.T.No.6 |
Quill
Stroke |
mm |
170 |
Bed
Length |
mm |
2730,3230,3730,4230,4730 |
Width |
mm |
550 |
MotorsSpindle
Motor |
kW |
AC15/18.5(Cont/30min.
rating) |
X-axis
Servo Motor |
kW |
AC 1.8 |
Z-axis
Servo Motor |
kW |
AC.3.5 |
Hyd.
Pump Motor |
kW |
1.5*4p |
Coolant
Pump Motor |
- |
30KVA(24kw) |
Weight |
kg |
6000,6500,7000,7500,8000
6500,7000,7500,8000,8500 |
..................................................................................................................
.........ㆍKnee type drilling machine, which
can set the position of workpiece
......... ..on
the table both vertically and horizontally, thereby permitting
......... ..a
variety of hole patterns.
.........ㆍInfinitely variable speed change
(2ranges) of the revolving spindle allows you to
......... .
drill a wide variety of materials.
.........ㆍThe feed rate is infinitely
variable through the NC unit.
.........ㆍAlong with infinitely variable
spindle speeds, this combination allows you to choose
......... .
the ideal cutting conditions for all tool diameters.
.........ㆍAll operations except setting
and removing the workpieces are automatic cycles,
......... .
minimizing labor costs and reducing operator skill.
.........ㆍA spindle load meter with set
points is supplied as a standard device to stop the drill
......... .
feed and return the slide to its starting position in case of excessive
torque due to
......... .
a broken drill or chip jamming.
.........ㆍNC unit makes it possible to
process complicated hole patterns and different hole depths.
.........ㆍFully automatic operation allows
you to reduce labor costs and scrap fewer parts
......... .
by error of operator.
ㆍGun Drilling Machine
ㆍGun Drilling Machine
- |
- |
KSG-600
, KSG-1000 |
Capacity
|
Hole
dia |
ø5~ø25mm |
" |
hole
death |
max
600mm,max 1000mm |
Main
Spindle |
Rotation
Speed |
Low
1200~2800 r.p.m Steplessn High 2800~6000 r.p.m Stepless
Belt Change RPM meter |
" |
Gun Drill
Holder |
ø48*ø
12.7 ø19.05 ø25.4 ø31.75 4( option) |
" |
Rapid
Traverse Speed |
6000mm/min
, 6000mm/min |
" |
Cutting
Speed |
22~540mmStepless,
DIGITAL |
" |
Traverse
Speed |
AC mechanical
feed |
Table |
Left/Right
Stroke |
460mm
, 700mm |
" |
Up/Down
Stroke |
250(50~300)mm
|
" |
Table
Size |
600*1000mm
, 1000mm*1500mm |
" |
Max.Loading
W'T |
1000kg
|
" |
L/R Rapid
Traverse |
2260mm/min
|
" |
U/D Rapid
Traverse |
1140mm/min
|
Chip
Box |
Bushing
Stroke |
15mm
Air System |
" |
Rear
Seal |
~ø5.5
ø5.6~ ø10.7 ~ø15 ø15~ø19 ø19~5 (option) |
Whip
Guide |
Whip
Guide
Adapters |
~ø5.5~5.6~ø10.6
ø10.7 ~ø15 ø15~ø19 ø19~5 (Bearing)(option) |
Coolant
|
Tank
Capacity |
Clean800L
, Dirty300L |
" |
Pump
|
80L/min
at 30kg/cm² |
" |
Pressure
Adjustment |
30~70kg/cm²
|
" |
Separator
|
80L /min
|
Motors
|
Main
Spindle |
3.7kw
4P |
" |
Spindle
Traverse |
1.0kw
AC Sevo |
" |
L/R Rapid
Traverse |
0.75kw
, 6P |
" |
U/D Rapid
Traverse |
2.2kw
, 6P |
" |
Separator
|
100w
|
" |
Return
Pump |
2kw |
" |
Coolant
Pump |
11kw
, 6P |
Net M/C
W'T |
- |
3800kg
, 6000kg |
..................................................................................................................
......
.........ㆍ
The spindle is stepless rotated in range, so that the high and stable
horse power
......... ...can
be obtained even in a low speed.
.........ㆍHigh
Rigidity table design for heavy loading and cutting.
.........ㆍFully Automatic Function.
.............The device has simplification
and veriety more than other special purpose loader system.
.............Loading and unloading
process are continued automaticcally.
Model
|
THM
45 X 100 |
|
Table
Size |
455 x 2400 mm
|
Table
Height on Floor |
940 mm |
Table
Stroke
|
Maximum 960 mm
|
Table
Feed Speed(Rapid) |
10000 mm/min |
Table
Feed Speed(Cutting) |
20~2000 mm/min |
Table
Maximum Workpiece weight |
2160 kg |
|
Spindle
Nose |
ISO NT50 |
Distance
Between Table and spindle Center |
410 mm |
Spindle
Stroke |
350 mm |
Spindle
Speed (Auto Stepless) |
40~400 rpm |
Spindle
Feed Speed |
20~5000 mm/min |
Distance
Between Spindle To Spindle |
200~900 mm |
Motors |
Spindle
Motor (Y & Z - Axis) |
18.5/22 Kw |
Table
Traverse Motor (X - Axis) |
5.9 Kw |
Spindle
Traverse Motor (Y & Z - Axis) |
3.8Kw |
CNC-Unit
|
FANUC 0-MC |
Floor
Size (H X L X W) |
280 X 6200 X 4200 mm |
Machine
Weight |
12500 kg |
..... High
Efficiency Processing
.........ㆍFirst,
the operator will clamp specimen blocks to the fixture and select
the 'Machining Start'
.............button on the Control box.
.........ㆍThen, the turn table will be
moved to the loading position and it will be loaded to a reference
.............position for machining.
.........ㆍSubsequently, it machine all
tensile specimken simultaneously as shown in Fig. 2.
.........Table 1. kinds of regular rectangle
tensile specimen(Unit:mm)
Total
Length |
Parallel
Length |
Radius |
Parallel
Width |
| 450
|
220 |
⊇25 |
40 |
450 |
220 |
⊇25 |
25 |
350 |
60 |
⊇15
|
25 |
350 |
60 |
⊇25 |
38.1 |
350 |
60 |
20⊇30
|
12.5 |
.........Fig
2 Concept of machining for rectangle tensile specimen
.........ㆍAfter machining, the machined
fixture goes out to the clamping position automatically.
.........ㆍThat is all. It is a very simple
process for the operators also.
.........ㆍThe specimen have very precise
machining results for dimensional tolerances as accepted in all of
the
......... ..above
standards.
 
..................................................................................................................
|
